Pro-Ject T1 EVO: Troubleshooting No Sound Issues

Initial Power and Model Identification

• ⚡ Test the power by setting the switch to position one or two to ensure the turntable is rotating.
• 💡 Identify your T1 EVO model: Standard, Phono, or Bluetooth, by examining the cables and ports on the back.
  • Standard versions have permanently attached cables and require an external pre-amplifier.
  • Phono versions have detachable RCA cables and a built-in pre-amplifier.
  • Bluetooth versions have two sets of RCA ports and a built-in pre-amplifier.

Understanding Audio Setup Components

• 🎶 A typical setup involves a turntable, pre-amplifier, amplifier, and speaker.
• 🔊 Active speakers have a built-in amplifier, while passive speakers require a separate amplifier.
• 🔌 The T1 EVO Phono and Bluetooth models have a built-in pre-amplifier, offering the choice to use it or an external one.

Correcting Connection and Switch Settings

• ⚙️ For the T1 EVO Phono model, set the switch to 'Line Out' if using the built-in pre-amplifier, or 'Phono Out' if using an external one.
• 🔵 For the Bluetooth model, select the correct set of ports (line out or phono out) instead of using a switch.
• 🔌 Ensure your speaker is active by checking for an external power cord.
• ➡️ Verify RCA cable direction, with arrows pointing from the turntable towards the amplifier or speaker.

Grounding and Final Checks

• 🔩 Grounding can be attached if your pre-amplifier, amplifier, or speaker has a screw terminal for it.
• ✅ Double-check that the correct ports are connected and the switch is set appropriately for your model and setup.
• 💡 If you have a T1 EVO Phono or Bluetooth and no sound, the issue is likely with the 'Line Out' setting or incorrect port connection, especially if not using an external pre-amplifier.