HP OmniBook X: How to Boot from USB Drive (Windows Install Guide)

Preparing to Boot from USB

• ⚠️ Important Warning: Bootable Windows USBs created from Microsoft's website may not work on ARM-based HP OmniBook X models.
• 💡 For ARM laptops, it's recommended to use Windows installation media obtained directly from the manufacturer to avoid compatibility issues.
• 🔌 Ensure your HP OmniBook X is completely shut down by holding the power button until all lights turn off.
• 💾 Plug in your prepared USB drive before proceeding.

Accessing the Boot Menu

• ⚡ Press the power button to turn on the laptop.
• ⌨️ Immediately start repeatedly pressing the Escape key to access the startup menu.
• 🚀 Within the startup menu, press the F9 key to open the boot menu.

Booting from USB

• 🎯 Use the arrow keys to select your USB hard drive from the list.
• ✅ Press the Enter key to confirm your selection and initiate the boot process from the USB drive.
• 🛠️ If your USB drive is not recognized, refer to manufacturer-specific guides or troubleshooting steps for ARM laptops.

Summary and Next Steps

• ✅ This guide covers the essential steps to boot your HP OmniBook X from a USB drive for tasks like Windows installation or diagnostics.
• 👍 Remember to like and subscribe for more helpful tutorials.