How to Set Up Your DREAME Aqua10 Roller Robot Vacuum

Initial Setup and Physical Installation

• 💡 Install the roller onto the docking station by simply placing it on top until it clicks.
• ⚠️ Remove protective foam from the bumper and the camera sticker to ensure proper navigation and functionality.
• 🚀 Slide the robot into the docking station, ensuring the connectors on the back align, and it should power on automatically.

Docking Station Placement and Water Tank Setup

• 📌 Position the docking station with at least 5 cm (2 inches) of clearance on both sides and 1 meter (40 inches) in front for optimal robot operation.
• 💧 Open the top lid to access the two water tanks; fill the clean water tank (white translucent) and identify the dirty water tank (black translucent).
• 🗑️ Ensure the dust bag is installed in the designated compartment and slide out the tray to add the official cleaning solution.

Connecting to the Dreamy Home App

• 📲 Download the Dreamy Home app on your mobile phone and tap 'Add' to begin the pairing process.
• 🤖 Select the Aqua10 roller series and confirm the robot has been turned on.
• 📶 Simultaneously press and hold the Clean and Dock buttons for 3 seconds to initiate network configuration.

Wi-Fi Connection and Permissions

• 🌐 Connect to a 2.4 GHz Wi-Fi network; the robot does not support 5 GHz networks.
• 📍 Grant Location and Bluetooth permissions in your phone's settings, which are necessary for the app to connect to the robot.
• 🔑 Enter your Wi-Fi password and click 'Next' to generate a QR code.

Finalizing Setup and Updates

• 📱 Present the generated QR code to the robot's camera at approximately 10 cm (4 inches) distance to start the connection.
• ✅ Once successfully connected, you can rename the device and finish the setup.
• ⚙️ The app may prompt for plugin downloads and firmware updates; it's recommended to perform these for optimal performance.