How to Set Up the Dreame X50 Ultra Robot Vacuum with the Dreamy Home App

Initial Physical Setup

• 🔌 Ensure the robot is plugged into power and the main switch is turned on.
• 🗑️ Remove the top cover and install the dust bag by sliding it into place.
• 💧 Fill the detergent compartment using only official Dreamy detergent to prevent device damage.
• 🧼 Attach the mopping pads to the designated holders, which use Velcro and magnets for easy attachment.

Preparing the Robot and Dock

• 🔋 If the robot is not charged, physically slide it into the charging station; otherwise, press and hold the power button until it sounds to turn it on.
• 🏠 Once powered on, press the home button to send the robot to its charging dock.

Dreamy Home App Setup

• 📱 Download and open the Dreamy Home app on your Android or iPhone.
• 👤 Sign in or sign up for an account, then allow Bluetooth access when prompted.
• ➕ Click 'Add' to add a new device and select the X50 Ultra model.

Wi-Fi and Network Configuration

• 🔊 Press and hold the clean and dock buttons simultaneously for 3 seconds to enter network configuration mode.
• 📍 Allow location services for easier Wi-Fi network discovery.
• 📶 Connect to a 2.4 GHz Wi-Fi network (not 5 GHz) and enter the password.
• 📸 Aim your phone's QR code at the robot's camera and wait for the "Start connecting to network" prompt, then click next.

Finalizing Setup and Mapping

• ✅ Click finished to complete the setup and allow the app to download a necessary plugin for full robot functionality.
• 🗺️ Initiate fast mapping to create a map of your home for the robot.