How to Safely Change Bands on Apple Watch SE 3

Preparing Your Apple Watch SE 3

• 💡 Turn your Apple Watch upside down and place it on a soft, smooth surface to prevent sliding and potential display damage.

Locating and Using Release Buttons

• 📌 Locate the two release buttons on the back cover of the Apple Watch by moving the band to the side.
• 🔑 Press and hold one release button with your fingernail to disengage the band.

Removing the Old Band

• ➡️ Move the band end to the left or right while holding the release button until it starts to move.
• ⚠️ Carefully remove one side of the band once it begins to slide out.
• 🔄 Repeat the process for the other side of the band, pressing the release button and sliding the band end.

Attaching the New Band

• 🧐 Check the inner side of the new band for size and other characteristics, as this side faces your wrist.
• 🎯 Align the ends of the new band with the slots on the sides of the Apple Watch.
• 🖱️ Carefully push the band end inside until you hear a click, indicating it is fixed.
• ✅ Repeat for the other side of the band, ensuring it clicks into place.
• 💯 Perform a final check to confirm both sides of the band are securely attached.