How to Replace and Clean the Main Brush on a Dreame X50 Ultra Robot Vacuum

Accessing the Main Brush

• 🔌 Remove the robot from its charging station before beginning any maintenance.
• 🔄 Flip the robot over to expose the underside where the main brushes are located.

Removing the Brush Cover

• 🤏 Pinch the two tabs on the brush cover simultaneously to release it.
• 💡 Once the cover is off, you will see the two connected main brushes.

Brush Removal and Reinstallation

• ⚠️ Only unscrew and remove the brushes if they need replacement or deep cleaning to avoid damaging the screw.
• 🔩 Unscrew the retaining screw to slide the brushes out for maintenance.
• 🎨 When reinstalling, pay close attention to the orange and black markings on the brushes and ensure they are placed in the correct order.

Finalizing the Maintenance

• ✅ Close the brush cover, ensuring the front part is secured first, followed by the back part.
• 🧐 Perform a final check to confirm the cover is properly closed and secured.
• 🚀 Following these steps will help prevent hair jams, improve suction, and extend the life of your Dreame X50 Ultra.