How to Remove and Reinstall the Roller Brush on Narwal Freo X Plus

Removing the Roller Brush

• 🔄 First, flip the Narwal Freo X Plus robot vacuum onto its back to access the underside.
• 📌 Locate the roller brush module, which is the main brush assembly.
• 💜 To remove the brush, squeeze the two purple tabs on the sides of the module towards each other.
• 💡 While squeezing the tabs, gently pull the roller brush module upwards and out.

Cleaning and Maintenance

• ✨ Once removed, the roller brush can be easily cleaned or maintained as needed.

Reinstalling the Roller Brush

• 🧩 To put the roller brush back, align it correctly with the corresponding part on the robot.
• ➡️ Ensure the brush module is oriented properly, with the lower part fitting first.
• 🔒 Squeeze the two purple tabs again to secure the roller brush module in place.
• ✅ The roller brush should now be firmly in place and won't move.