How to Install Windows on HP OmniBook X (ARM Processor) Using HP Cloud Recovery Tool

Preparing for Windows Installation

• 💡 The HP OmniBook X features an ARM processor, requiring a different installation method than traditional laptops.
• ⚠️ This guide is essential if your system is locked, corrupted, or you need a fresh start.
• 💻 You will need a separate Windows computer with internet access and a USB drive of at least 32 GB.

Using the HP Cloud Recovery Tool

• 🚀 Access the Microsoft Store on your Windows computer and search for the HP Cloud Recovery Tool.
• 🛠️ Install and run the tool as an administrator to create a bootable USB drive with necessary drivers for the ARM architecture.
• 🔌 Ensure your HP OmniBook X remains plugged into its power cord throughout the entire process.

Creating the Bootable USB Drive

• 📌 Locate the Product ID on the bottom of your HP OmniBook X and enter it into the HP Cloud Recovery Tool, including the country code.
• 💾 Plug in your USB drive (at least 32 GB) and select it within the tool; be aware that all data on the drive will be erased.
• ✅ The tool will partition and prepare the USB drive, which may take some time.

Booting and Installing Windows

• 🔌 After the USB is ready, shut down your HP OmniBook X completely.
• ⚡ Press the power button, then immediately start pressing the Escape key to access the startup menu.
• 🖱️ Select F9 to enter the boot menu and choose your USB hard drive to boot from.
• ⚠️ During installation, all files on the hard drives will be deleted; do not disconnect AC power.

Completing the Installation

• 💬 Follow the on-screen prompts, selecting your language and proceeding through the setup.
• 💡 Once the installation is complete, unplug the USB drive and allow the laptop to restart.
• ✨ The initial Windows setup process will then begin.