How to Install Custom Recovery (TWRP) on Samsung Galaxy A32 5G

Initial Device Setup and Preparation

• 💡 Ensure your Samsung Galaxy A32 5G is set up and connected to Wi-Fi, as this is crucial for enabling OEM unlocking.
• ⚠️ It's recommended to remove your Google account from the device before proceeding to avoid Factory Reset Protection (FRP) issues.
• ⚙️ Navigate to Settings > About phone > Software information and tap the Build number seven times to enable Developer Options.
• 🔓 Within Developer Options, enable OEM unlocking; this option will only appear if you are connected to Wi-Fi.

Bootloader Unlocking and File Preparation

• 📌 Verify your device model (e.g., SM-A326B) as custom recovery files are model-specific.
• 💻 Download necessary files, including custom recovery (like TWRP) and a utility to disable protection mechanisms, typically found in the video description.
• 💾 Download and install Samsung USB drivers and Odin (a flashing tool) from hardreset.info or similar sources.
• ⚠️ Restart your computer after installing the drivers for them to function correctly.

Flashing Custom Recovery with Odin

• 🔌 Connect your phone to the computer using a USB cable.
• ⬇️ Power off the phone, then boot into Download Mode by holding Volume Up and Volume Down simultaneously while plugging in the USB cable.
• 👆 Press and hold Volume Up on the blue screen to confirm entering Download Mode.
• 📂 Open Odin on your computer and load the custom recovery file into the AP slot.
• ⚡ Select the vbmeta-disabled.img file in the appropriate slot (often referred to as USERDATA or similar in guides).
• ⚙️ In Odin's options, ensure Disable Auto Reboot and Disable Factory Reset are checked.
• ▶️ Click Start to flash the custom recovery.

Booting into TWRP and Data Wiping

• 🔄 Immediately after flashing, press and hold Power + Volume Down until the screen turns off, then quickly switch to Power + Volume Up.
• 🚀 Release the Power button when the Samsung logo appears, continuing to hold Volume Up until you boot into TWRP recovery.
• 🧹 In TWRP, go to Wipe > Format Data, type yes, and confirm to remove encryption.
• 🗑️ Perform an Advanced Wipe on Dalvik/ART Cache, Cache, and Internal Storage.

Installing Custom ROMs (Overview)

• 💽 After wiping, reboot back into recovery.
• 💻 Connect your phone to the computer; it should appear as a storage device.
• 📂 Copy your desired custom ROM zip file to the phone's storage.
• 🛠️ Alternatively, use ADB Sideload from TWRP if direct file transfer is not possible.
• ✅ Follow on-screen instructions in TWRP to install the custom ROM zip file.