How to Install a Cuboid Indoor LED Display: Step-by-Step Guide

Preparing LED Cabinets

• 📐 Start by taking two LED cabinets with 45° bevel edges and fitting them together to form a precise 90° right angle.
• 🔗 Install connecting iron sheets at the joints to ensure the cabinets remain perfectly aligned.
• 🛠️ Use screws to initially fix the cabinets in place.

Assembling the Frame

• 📏 Adjust the flatness between the LED cabinets and install connectors on both the left and right sides.
• 🧱 Connect additional cabinets based on the established right angles to form a rectangular frame.
• 🔩 Tighten screws symmetrically to prevent uneven force distribution and ensure structural integrity.

Layering and Alignment

• ⬆️ Install the second layer of LED cabinets, carefully aligning the positioning columns on the bottom cabinets.
• ✅ Ensure accurate alignment between the upper and lower layers for a seamless display.
• 🔒 Secure the upper and lower cabinets with screws to maintain a stable structure.
• 🏗️ Continue this layer-by-layer installation process until the entire structure is complete.

Connections and Testing

• 🔌 After assembly, connect the left and right LED cabinets with power cords.
• 📶 Use the signal line to connect the upper and lower layers of LED cabinets.
• 🔍 Run a test screen to identify any dead pixels or color differences.
• ⏳ Conduct a continuous 72-hour run test to ensure the stability and reliability of the display.