How to Find the Test Point on a Samsung Galaxy S21 FE 5G

Preparing the Samsung Galaxy S21 FE 5G

• ⚠️ Power off the device completely before starting any disassembly.
• 🔥 Heat the back lid using a hair dryer or a specialized heater to soften the adhesive.
• 💡 Once heated, the back cover can be carefully pried off with minimal effort.

Internal Component Removal

• 🛠️ Use a Phillips screwdriver to remove the necessary screws securing the internal components.
• 📌 Note which screws are removed to ensure correct reassembly.
• 🔌 Gently disconnect the wireless charging module and other connected components using a plastic, non-metallic tool.

Locating the Test Point

• 🔍 Carefully pry away the protective tape to expose the service area.
• ✨ The test point consists of two specific pins that need to be identified.
• 🎯 These pins are used to connect to put the device into a special mode for tasks like bypassing FRP or installing custom software.

Using the Test Point

• 🔗 To activate the test point mode, you will need to connect the two pins together using a tool like a screwdriver or tweezers.
• 💡 This connection allows for advanced operations on the device.
• ✅ Always proceed with caution when performing advanced operations to avoid damaging the phone.