How to Connect Your Epson ET-1810 Printer to a New WiFi Network

Accessing Printer Network Settings

• 🖨️ Press and hold the Wi-Fi button on your Epson ET-1810 until it prints a network information page.
• 🔍 Locate the TCP IP address on this page, which is essential for accessing the printer's admin panel.

Logging into the Admin Panel

• 💻 Enter the printer's IP address into your web browser (e.g., Chrome).
• 🔑 Click "Login as admin" and enter your printer's serial number to unlock all features. Remember to use capital letters and exclude any asterisks shown on the label.

Configuring New WiFi Connection

• ⚙️ Navigate to "Advanced Settings," then "Network Settings," and finally "Wi-Fi."
• 📶 Click "Setup" to view available WiFi networks. Note: The ET-1810 only supports 2.4GHz networks, not 5GHz.
• 🌐 Select your desired network from the list (e.g., a portable hotspot) and enter the corresponding WiFi password.

Verifying and Troubleshooting Connection

• ✅ Confirm the printer's connection status via the green icon on the printer and by reloading the admin panel webpage.
• ⚠️ If your computer is on a different network than the printer (e.g., printer connected to a phone hotspot), you may not see the printer in discoverable devices. Ensure both devices are on the same local network for visibility.