How to Change Straps on the Amazfit T-Rex 3 Pro 48mm

Removing Existing Straps

• ⌚ To begin changing straps on the Amazfit T-Rex 3 Pro 48mm, first flip the watch over to access the back.
• 🛠️ Locate the quick-release lever on each strap; pulling this lever will release the strap from the watch.
• 💡 If the lever is difficult to pull, use a fingernail or a pointed tool to get a better grip and retract the pin.
• ✅ Repeat this process for both the top and bottom straps to fully remove them.

Understanding the Mechanism

• ⚙️ The watch has holes on each side, and the straps have pins that lock into these holes.
• 🔗 When the quick-release lever is pulled, it retracts the pin, allowing the strap to be detached.

Installing New Straps

• 📌 To install a new strap, identify the top part of the watch.
• 🚀 Take the strap and insert one side into the corresponding hole on the watch.
• 🤏 For the second side, you will need to pull the quick-release lever to retract the pin, then push the strap into place until it aligns with the other hole.
• ✅ Ensure the strap clicks securely into place by checking that the pin is fully engaged and the band is locked.
• 🔁 Repeat the process for the other strap, making sure both are firmly attached and secure.