How to Bypass FRP on Samsung Galaxy S21 FE 5G Using Octo Plus Tool

Preparing for FRP Bypass

• 💡 To bypass FRP on your Samsung Galaxy S21 FE 5G, you first need to remove the phone's cover and locate the test point.
• 📌 The test point consists of two small dots that need to be joined together with a conductive tool to enter EDL mode.
• ⚠️ If you are unsure how to open the phone or find the test point, a separate video on the channel provides detailed instructions.

Computer Setup and Software Installation

• 💻 Prepare your computer by installing the necessary Samsung drivers from hardreset.info.
• 🚀 After installing the drivers, restart your computer for the changes to take effect.
• 🛠️ Download and install the Octo Plus tool, a paid software that costs $29 for a month of access, allowing unlimited phone unlocks.

Performing the FRP Bypass

• 🔌 Open the Octo Plus software and ensure the correct model (SM-G990B2 for S21 FE 5G) is selected.
• ⚡ Select the 'Reset FRP EDL method' and click 'Proceed' to initiate the process.
• ⚠️ Connect the phone by touching the test points together, plugging in the battery, and then connecting the USB cable.
• 🔍 The phone should appear as a Qualcomm device in the Device Manager; multiple attempts may be necessary.
• ✅ Once connected, click 'Proceed' again, and the software will send the FRP reset command.

Post-Bypass Steps and Reassembly

• 🔋 After a successful reset, the phone may show as charging; unplug it and attempt to turn it on.
• 🚀 If the phone boots up and allows you to skip the Wi-Fi setup, the FRP bypass was successful.
• 🔧 Before reassembling the phone, ensure it is powered off (using Power + Volume Down) and then put all the parts back together.
• 👍 This video provides a comprehensive guide to bypass FRP on your Samsung Galaxy S21 FE 5G.