How to Assemble the Stand for TOSHIBA 32WA2363DG Android TV

Preparing the TV and Stand Components

• 💡 The Toshiba 32WA2363DG Android TV is laid on a desk for convenient assembly.
• 📦 The TV stands are unpacked, noting that they are not initially labeled for left or right.

Attaching the TV Stands

• ➡️ Arrows on the stands indicate the front of the monitor; the longer part should face forward.
• 🔩 Screws, found in blue foil, are used to attach the stands. It's recommended to screw them in partially with fingers before using a screwdriver.
• ⚠️ Be aware that screwing into plastic can sometimes feel difficult due to uneven holes, which helps with a better hold.
• 🧩 If alignment issues arise, unscrew slightly, realign the stand, and re-screw. Some stands may have alignment holes that need careful matching.
• 🔧 One stand had a slightly crooked factory alignment, but it was successfully screwed in strongly.

Finalizing the Stand Assembly

• 🦶 Rubber pads are attached to the feet of the stands, both at the top and bottom on the back, to prevent sliding and protect surfaces.

Connecting Power and Initial Setup

• 🔌 The power cable is connected to the TV's input port and then to a power outlet.
• ▶️ The TV appears to turn on automatically, but a manual power button is also indicated if needed.
• 🚀 The video concludes by recommending a separate setup guide and encouraging likes and subscriptions.