HONOR 6X FRP Bypass: Step-by-Step Guide to Remove Google Account Verification

Initial Setup and Requirements

• 💡 Ensure your HONOR 6X is charged to at least 60%, though 100% is recommended.
• 💻 A computer is necessary for the FRP bypass process, along with internet access.

Performing a Factory Reset

• 🔌 Power off the device by holding the power button and selecting 'Power off'.
• ⬆️ Press and hold the Power and Volume Up buttons simultaneously until the EMUI screen appears to enter recovery mode.
• 🗑️ Navigate to 'wipe data/factory reset' using volume buttons and confirm with the power button.
• 🔄 Select 'wipe data' and then 'factory reset' again to confirm the reset.

Downloading and Installing Tools

• 🌐 Visit hardreset.info and download the Huawei P20 drivers (compatible with HONOR 6X) and miniADB and fastboot with drivers.
• 🛠️ Download the FRP unlocker tool from the same website.
• 📂 Extract all downloaded archive files using a program like WinRAR.
• 💻 Run the driver setup files, preferably as an administrator, and install all Android fastboot files.

Configuring Phone Settings for Bypass

• 📱 After the reset, select English language and proceed through initial setup until Wi-Fi connection.
• ↩️ Go back repeatedly until you reach the main screen, then access 'Emergency Call'.
• 📞 Dial the secret code *#*#2846579#*#* to open the Project Menu.
• ⚙️ In the Project Menu, navigate to 'Background Settings', then 'USB port settings', and set it to 'Google mode'.
• 📊 Next, go to 'Log Settings' and set it to 'AP log only'.
• 🔄 Restart the phone by holding the power button and selecting 'Restart'.

Connecting to Computer and FRP Unlock

• 🔌 Connect your HONOR 6X to the computer using a data-transfer-capable micro USB cable.
• 🖥️ Open Device Manager on your computer and verify that a 'Control switch' or similar device appears when the phone is plugged in.
• ✅ If the device is detected, open the FRP unlocker tool on your computer and click 'Unlock'.
• ⏳ Wait for the tool to confirm 'Success' and ensure the phone remains connected.
• 🔌 Unplug the cable and restart the phone again.

Final Steps and Recommendations

• 🏠 Upon restart, the phone should be on the home screen, bypassing Google verification.
• ⚠️ If the bypass fails, ensure the cable is properly connected and try the unlock process again.
• ✨ For optimal stability, it is recommended to perform a final factory data reset through the phone's settings to ensure no future lock issues.
• 👍 The phone will then be set up as a new device without FRP locks.