EagerLED Outdoor Pole LED Display Installation Guide: EA-OFixed Model

Module and Cabinet Assembly

• 💡 Install LED modules one by one onto the LED cabinet and fix them from the back with screws.
• ⚙️ After module installation, place the LED cabinet horizontally, properly position the cooling fan, and tighten its fixing screws.
• 🔌 Remove and place the LED power module in its fixed position, securing it with screws, then connect power lines to all LED modules.
• 🔌 Ensure sufficient power supply by connecting all power lines, then tidy up cables.

Data Connections and Testing

• 🔗 Connect the data cables of all LED modules to each other.
• 📦 Insert the data receiving box and tighten all fixation screws.
• 💾 Install the LED data receiving card in its designated position and secure it with screws.
• 🔌 Connect all data cables to the data receiving card to finalize module installation within the cabinet.
• 🌊 Transport the assembled LED cabinet to the waterproof testing area and conduct a 15-minute test.
• ✅ Inspect the cabinet after the waterproof test; only pass cabinets can proceed to aging testing.

Aging Test and Quality Assurance

• 🚚 Transport the outdoor pole LED display to the aging test area.
• 📦 Move LED cabinets to their designated locations and securely fasten the handles with straps.
• 🏗️ Install all LED cabinets onto shelves in sequence.
• 🔍 Run a test screen to check for dead pixels and color differences.
• ⏳ Play content continuously for 72 hours to ensure stability and performance.