DOOGEE Tab E3 Pro: Step-by-Step SIM & SD Card Insertion Guide

Preparing for SIM and SD Card Insertion

• 🛠️ You will need a SIM eject tool (often included with the device) or a straightened paper clip.
• ⚠️ Ensure the paper clip does not have a plastic coating, or remove it if present.

Locating and Opening the SIM/SD Tray

• 📍 The SIM/SD tray is located on the bottom of the tablet, near the charging port.
• 📱 If you have a case, you may need to partially lift a corner of the case to access the tray.
• ➡️ Insert the eject tool or paper clip into the small hole next to the tray and push gently until the tray pops out.

Inserting SIM and SD Cards

• 💳 The tray has space for one SIM card and one microSD card.
• ⚠️ Pay close attention to the orientation of each card as you place them on the tray.
• 🧩 Ensure the cards are seated correctly and do not shift during insertion to avoid jamming.

Completing the Installation

• 🚀 Carefully reinsert the tray into the tablet, wiggling gently if needed.
• 💡 The tablet will automatically detect the cards, and you may see a SIM PIN prompt to unlock your SIM card.
• ✅ Successful detection indicates both the SIM and SD cards are working correctly.