ASUS Motherboard: Fix 'Setup Does Not Support USB Installation' Error

Resolving the USB Installation Error on ASUS Motherboards

• 💡 The video addresses the common error: 'setup does not support configuration and installation to disk connected through a USB' on ASUS motherboards.
• 🔑 The primary solution involves adjusting specific BIOS settings to enable USB installation.

Accessing and Navigating BIOS Settings

• 🚀 To begin, escape the one-time boot menu by pressing Enter and then Left Alt + Y (or the corresponding letter for your language).
• 💻 Next, spam the F2 button (or Esc, F11, F12, Delete depending on your model) to enter the BIOS.
• ⚙️ Press F7 to access the Advanced Mode within the BIOS.

Disabling VMD for USB Boot

• 🎯 Navigate to Advanced VMD Setup using the arrow keys and press Enter.
• 🚫 Select Disabled by pressing Enter and then click OK.
• 💾 After disabling VMD, press F7 to exit Advanced Mode, then F10 to save changes and reset the system. Confirm by pressing Enter.

Booting from USB and Installation

• 🔌 To initiate the installation, spam the Escape button to open the one-time boot menu and select your USB drive, then press Enter.
• ⏳ The system will load the setup; you can navigate using Tab (next) and Shift + Tab (previous).
• 🔧 Proceed through the Windows setup, including language, time, and keyboard input method selection.
• ✅ The error should now be resolved, allowing the installation to proceed to disk searching.