How to Install Arlen Ness Diamond Floorboards on a Harley-Davidson Bagger

Arlen Ness Diamond Floorboards Overview

• 💡 The Arlen Ness Diamond Floorboards feature a unique diamond cut-through pattern and titanium inserts for superior foot traction.
• 🚀 Machined from aircraft-grade aluminum, these floorboards are lightweight yet offer significant grip due to their sharp inserts.
• ✨ Available in blue, red, black, and chrome, they also come with matching passenger boards and other Arlen Ness Diamond accessories.
• ⚠️ A mini version is available, offering more cornering clearance by reducing the rear length and saving weight.

Driver Floorboard Installation

• 🛠️ For driver floorboards, you'll need a 3/16 Allen wrench and a 7/16 wrench.
• ⚙️ Remove the existing floorboards by loosening the 7/16 nut and 3/16 Allen screw, reusing the hardware for the new boards.
• 📌 When installing, align the Arlen Ness logo towards the front of the board and snug up the nuts, using a 7/16 socket for reinstallation.

Passenger Floorboard Installation

• 🔧 For passenger floorboards, a 3/16 and 1/4 inch Allen wrench are needed if removing the entire mount.
• 🧩 The installation involves prying off the top part, backing off a 3/16 Allen screw to release a spring-loaded ball and detent, and then pushing a pin to remove the old board.
• 💡 When installing the new board, slide the pins in while pressing down on the ball and spring, securing them with tiny set screws and blue Loctite.
• ✅ Ensure the set screws are not bottomed out, providing firm engagement for the board's up and down movement.

Installation Summary

• ⏱️ The entire installation process for both driver and passenger floorboards is straightforward and should take approximately 45 minutes with basic hand tools.
• 💻 For more information, check the product detail page via the info tab or contact customer service.